- Can remove wheel hubs, half shafts, brake drums, drive shafts directly in the car
- Heavy duty set for the removal of stubborn four and five stud hubs and brake drums on cars and light commercial vehicles
- Suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, FIAT, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche…etc
- A mechanical spindle can press out drive shaft
- Spindle pressure: Maximum 12 t
- With the 4,3kg slide hammer
- Highest quality design for long life in industrial use
- Specification of 30 pcs:
- 4 x screw L15.4cm -2 circle
- 4 x screw L15.4cm -4 circle
- 4 x screw L16.8cm -2 circle
- 4 x screw L16.8cm -4 circle
- 4 x screw L16.8cm -4circle
- 4 x nuts Φ2.8cm
- 1 x lever for pneumatic wrench L25.8cm
- 1 x lever for slide hammer L57.3cm
- 1 x top block of lever for slide hammer
- 1 x hammer
- 1 x bearing-8 holes
- 1 x connecting block
- Supplied in a blow molded case
- Highest quality design for long life in industrial use
-
-
- 5 x open sided adaptors: 16mm, 19mm, 23mm, 25mm & 30mm
Spring compressor "C" clamp
3 x extension screws
1 x compression bar
1 x 10 Piece Spanner Set Valve
1 x storage case
- 5 x open sided adaptors: 16mm, 19mm, 23mm, 25mm & 30mm
-
- Extends working diameter range: 35mm-45mm
- Material: Carbon steel
-
- Total quantity: 131 pieces
- 110 pieces of steel thread inserts: M5 x 0,8 x 6,7mm; M6 x 1,0 x 10,8mm; M8 X 1,25 x 10,8mm; M10 X 1,5 x 13,5mm; M12 X 1,75 x 16,3mm;
- 5x HSS steel drill; 5x HSS steel tap; 5x inserting tool;5x tang break.
-
- Maximum load: 1050 kg
- 3 Pairs of jaws including:
- 2x Jaws 65mm - 125mm (Application areas: 80mm - 115mm)
- 2x Jaws 88mm - 160mm (Application areas: 110mm - 150mm)
- 2x Jaws 125mm - 215mm (Application areas: 140mm - 195mm)
- Applicable to BMW, Toyota, Ford, Opel, VW, Audi, Saab,Nissan, Honda, Subaru, Volvo, Mitsubishi, etc.
- Spindle: M 15 x 300 mm
- Material: Carbon steel
-
- Applications: VAG, VW, Polo(9N), Fox, Skoda Fabia
-
- Flaring tool kit set material: Steel
- Tube bender material: Cast aluminium
- For pipe flaring and can be used to make single or double flares on copper/brass/aluminium pipes, etc.
- 1 red Tube bender for 1/4", 5/16", 3/8" O.D. tubing
- 1 flaring tool kit set: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"; includes 7pcs double flaring adapters; 1pc tube cutter; 1pc flaring tool
- Carton size for the tube bender: 7.6 x 6.5 x 28 cm
- Red portable case size: 27 x 22 x 6.5 cm
- Total delivery size: 30 x 28 x 8.5 cm
-
- Suitable for:
- Petrol engines:1,0- 1,1 - 1.4 - 1,6 - 1,8 - 1.9 – 2,0 liters;1,6 - 1,8 -2.0 - 2,2 - 16V
- Citroen models: AX - ZX - XM - Visa -Xsara - Xantia - Dispatch–Synergie / Evasion - Berlingo - Jumpy - C15 - Relay /Jumper - C5 (2000-2002) - C9
- Peugeot models: 106-205 - 206 - 306-307- 309-405 - 406-407 - 605-806 - 807 - Expert - Partner - Boxer (1986) - 406Coupe - 607
- Diesel engines:1,4to 1,5 – 1,7 – 1,8 to 1,9 – 2,1 - 2,5 D / TD / TDI 1,4 – 1,6 – 2,0 2,2 HDI
- Citroen Models: AX - ZX - XM - Visa - Xsara - Xantia -Dispatch - Synergy / Evasiol - Berlingo - Jumpy - C2 - C3 - relay / jumper
- Peugeot models: 106-205 - 206 - 305-307 - 309-405 -406-406 Coupe - 605-607 - 806 - Express - Expert - Partner - Boxer (1996)
-
- Kit size: 45 x 30 x 9.5 cm (L x W x H)
- Supplied in a blow molded case for easy storage
- Long lasting and durable construction for a long service life
- Kit includes:
- 4 synchronizer gauges with fixed plate (vacuum)
- 4 rubber pipes 8 x 750 mm
- 4 extension tubes 3.9 x 52 mm and 4 tubes 3.9 x 122 mm
- 8 tubes with conical connector 8 x 40 mm
- 4 tubes 10 x 53 mm (M6 x 0.75)
- 4 tubes 10 x 60 mm (M6 x 1.0)
-
- Colour: Grey, silver and green
- Material: Chrome-vanadium steel
- Tool case dimensions: 46 x 36,5 x 15 cm (W x D x H)
- 133-piece tool set in robust aluminium case:
- 1 x Water pump pliers 250 mm
- 1 x Combination pliers 180 mm
- 1 x Side cutter 160 mm
- 1 x 18 mm utility knife
- 10 x Break off blades (in case)
- 1 x 5 m tape measure (19 mm wide)
- 1 x Bench hammer 300 g
- 2 x Ratchet 3/8" with adaptor
- 9 x Socket 3/8" (10-11-12-13-14-15-16-17-18 mm)
- 8 x Socket 1/4" (4-4,5-5-5,5-6-7-8-9 mm)
- 1 x Adaptor for socket (10 x 6,3 mm)
- 1 x Bit adaptor (6,3 x 6,3 mm)
- 1 x Spark plug socket wrench (10 x 21 mm)
- 1 x Extension (10 x 75 mm)
- 1 x Extension (10 x 150 mm)
- 6 x Workshop screwdriver PH1 x 80, PH2 x 100 mm, slotted 3,0x75, 4,0x100, 6,5x125, 8,0x150 mm
- 2 x Precision screwdriver slotted 2,5 x 50 mm, PH00 x 50 mm
- 1 x Voltage tester
- 7 x Hacksaw with 6 spare blades
- 60 x Quick-change bit holder with 60 bits
- 1 x 1/4" screwdriver handle
- 8 x Combination wrench (6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22)
- 8 x Angled hex key (1,5-2,0-2,5-3,0-4,0-5,0-5,5-6,0)
-
- Car tool: Braking tools
- Material: Carbon steel
- Case size: 38,5 x 30 x 8 cm (L x W x H)
- Total weight: 4,7 kg
- For quick and efficient brake servicing
- Delivery includes:
- 26 x adaptor
- 2 x magnetic handed spindle (left and right)
- 2 x hex key (6 mm and 7 mm)
- 2 x pin punched (3 mm and 5 mm)
- 4 x reaction plate
- 3 x brake bushing
- 1 x CV joint grease
- Suitable for almost all types of cars
-
- Release Fork Opening: 28 mm, 23mm, and 17mm.
- Rippled handle, length: 200mm; Diameter: 19 mm
- 10 mm Air hammer handle, Length: 175 mm; Diameter: 12 mm