- Material: Carbon steel
- Case dimensions: 46 x 36.5 x 9.5 cm (L x W x H)
- Suitable for BMW M52 M54 M60 M62 E46
- Delivered in a durable storage case
- Suitable for BMW following models:
- - 320 E46 - 323 E46 - 325 E46
- - 328 E46 - 330 E46 - 520 E39
- - 520 E60 - 520 E39 - 523 E39
- - 525 E39 - 525 E60 - 528 E39
- - 530 E34 - 540 E34 - 535 E39
- - 530 E39 - 530 E60 - 728 E38
- - 730 E65 - 730 E35 - 730 E32
- - 735 E38 - 740 E32 - 740 E38
- - X3 E83 - X5 E53 - Z3 - Z4 E85
- Includes following tools:
- 1 x Camshaft adjusting tool (M52, M54)
- 1 x Vanos test gauge (M52, M54)
- 1 x Locking block cylinder 1-4 (M60, M62)
- 1 x Locking block cylinder 5-8 (M60, M62)
- 1 x Chain tensioner (M52, M54)
- 1 x Chain tensioner (M60, M62)
- 1 x Crankshaft lock
- 1 x Test adapter (M52, M54)
- 1 x Chain tensioner pin (M60, M62)
-
-
- Material: Steel
- Case dimensions: 38 x 10 x 6 cm (L x W x H)
- Set includes:
- 4 x Adaptor, 3.1 x 5 cm, 3.3 x 5 cm, 2.1 x 6.5 cm, 2.1 x 6.5 cm (Diam. x L)
- 4 x Slide hammer, 7.5 x 16 cm, 6.5 x 45.5 cm, 8.5 x 59.5 cm, 10.5 x 43.5 cm (Diam. x L)
- 3 x Nut (length: 3 cm, 3.5 cm, 4 cm)
- 2 x Nut (diameter: 2.3 cm, 2.6 cm)
- 2 x Jaw
- 2 x Puller (length: 10.5 cm, 12.8 cm)
- 1 x 9.5 mm spot weld cutter
- 12 x Screw (length: 3.6 cm, 5 cm, 3 x 5.5 cm, 5 x 6 cm, 2 x 6.1 cm)
- 1 x Extractor tool (length: 14 cm)
- 4 x Snap ring
- 1 x Shaft (length: 31.7 cm)
- 5 x Socket (25 mm, 27 mm, 28 mm, 29 mm, 30 mm)
-
- Paintless Dent Removal set includes:
- 10 x Repair rod (B-8, B-9, B-10, B-11, C-1, C-2, C-3, C-4, C-5, C-6)
- 1 x Dent lifter (red)
- 1 x Big T-bar slide hammer
- 1 x Glue gun (40 W)
- 1 x Line board with flexible holder (yellow and black)
- 10 x Glue stick (black, 11 x 200 mm)
- 1 x Mini T-bar handle (red and black)
- 1 x Crossbar puller with 7 different tabs
- 1 x Rubber repair hammer
- 1 x Tap down hammer
- 1 x Tap down tool with 8 different tips
- 10 x Glue tab (red)
- 10 x Glue tab (blue)
- 4 x Glue tab (yellow)
- 4 x Glue tab (aluminium)
- 1 x Plastic chisel (red)
- 1 x Plastic scraper (orange)
- 5 x Tap down pen
- 1 x Mini suction cup
- 1 x Carrying bag (red and black)
-
- Maximum load: 1050 kg
- 3 Pairs of jaws including:
- 2x Jaws 65mm - 125mm (Application areas: 80mm - 115mm)
- 2x Jaws 88mm - 160mm (Application areas: 110mm - 150mm)
- 2x Jaws 125mm - 215mm (Application areas: 140mm - 195mm)
- Applicable to BMW, Toyota, Ford, Opel, VW, Audi, Saab,Nissan, Honda, Subaru, Volvo, Mitsubishi, etc.
- Spindle: M 15 x 300 mm
- Material: Carbon steel
-
- Can remove wheel hubs, half shafts, brake drums, drive shafts directly in the car
- Heavy duty set for the removal of stubborn four and five stud hubs and brake drums on cars and light commercial vehicles
- Suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, FIAT, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche…etc
- A mechanical spindle can press out drive shaft
- Spindle pressure: Maximum 12 t
- With the 4,3kg slide hammer
- Highest quality design for long life in industrial use
- Specification of 30 pcs:
- 4 x screw L15.4cm -2 circle
- 4 x screw L15.4cm -4 circle
- 4 x screw L16.8cm -2 circle
- 4 x screw L16.8cm -4 circle
- 4 x screw L16.8cm -4circle
- 4 x nuts Φ2.8cm
- 1 x lever for pneumatic wrench L25.8cm
- 1 x lever for slide hammer L57.3cm
- 1 x top block of lever for slide hammer
- 1 x hammer
- 1 x bearing-8 holes
- 1 x connecting block
- Supplied in a blow molded case
- Highest quality design for long life in industrial use
-
- Colour: Grey, silver and green
- Material: Chrome-vanadium steel
- Tool case dimensions: 46 x 36,5 x 15 cm (W x D x H)
- 133-piece tool set in robust aluminium case:
- 1 x Water pump pliers 250 mm
- 1 x Combination pliers 180 mm
- 1 x Side cutter 160 mm
- 1 x 18 mm utility knife
- 10 x Break off blades (in case)
- 1 x 5 m tape measure (19 mm wide)
- 1 x Bench hammer 300 g
- 2 x Ratchet 3/8" with adaptor
- 9 x Socket 3/8" (10-11-12-13-14-15-16-17-18 mm)
- 8 x Socket 1/4" (4-4,5-5-5,5-6-7-8-9 mm)
- 1 x Adaptor for socket (10 x 6,3 mm)
- 1 x Bit adaptor (6,3 x 6,3 mm)
- 1 x Spark plug socket wrench (10 x 21 mm)
- 1 x Extension (10 x 75 mm)
- 1 x Extension (10 x 150 mm)
- 6 x Workshop screwdriver PH1 x 80, PH2 x 100 mm, slotted 3,0x75, 4,0x100, 6,5x125, 8,0x150 mm
- 2 x Precision screwdriver slotted 2,5 x 50 mm, PH00 x 50 mm
- 1 x Voltage tester
- 7 x Hacksaw with 6 spare blades
- 60 x Quick-change bit holder with 60 bits
- 1 x 1/4" screwdriver handle
- 8 x Combination wrench (6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22)
- 8 x Angled hex key (1,5-2,0-2,5-3,0-4,0-5,0-5,5-6,0)
-
- Material: Aluminium and plastic
- Case size: 41 x 28 cm (W x D)
- Delivery includes:
- Air tools:
- 1 x 1/2" air impact wrench
- 1 x 1/4" air die grinder
- 1 x 3/8" air ratchet wrench
- 1 x Air hammer (150 mm)
- 1 x Blow gun
- Accessories:
- 8 x Socket (11 mm, 12 mm, 13 mm, 17 mm, 1/2", 3/4", 5/8" and 9/16")
- 1 x Adapter (3/8"-1/2")
- 1 x Oil container
- 1 x Teflon tape
- 1 x 120 mm chisel (pointed)
- 1 x 120 mm chisel (flat)
- 1 x 120 mm chisel (edging chisel)
- 1 x Air coupler
- 1 x Bit holder
- 1 x 1/8" collet
- 1 x 5/32" hex key
- 1 x Tyre chuck
- 1 x Blow gun adapter
- 5 x 1/4" mounted grinding stone
- 5 x 1/8" mounted grinding stone
- 1 x Grinding wheel
- 10 x Grinding wheel paper
- 1 x Rubber nozzle
- 1 x Tapered nozzle
- 2 x Spanner
- 1 x Spring retainer
- 2 x Inflating needle
- 1 x High-pressure nozzle
- 1 x Safety nozzle
- 1 x Female nipple
- 5 x Male nipple
- 9 x Screwdriver bit
- All tools and accessories are stored in a handy blow-moulded case
-
- Car tool: Braking tools
- Material: Carbon steel
- Case size: 38,5 x 30 x 8 cm (L x W x H)
- Total weight: 4,7 kg
- For quick and efficient brake servicing
- Delivery includes:
- 26 x adaptor
- 2 x magnetic handed spindle (left and right)
- 2 x hex key (6 mm and 7 mm)
- 2 x pin punched (3 mm and 5 mm)
- 4 x reaction plate
- 3 x brake bushing
- 1 x CV joint grease
- Suitable for almost all types of cars
-
- Flaring tool kit set material: Steel
- Tube bender material: Cast aluminium
- For pipe flaring and can be used to make single or double flares on copper/brass/aluminium pipes, etc.
- 1 red Tube bender for 1/4", 5/16", 3/8" O.D. tubing
- 1 flaring tool kit set: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"; includes 7pcs double flaring adapters; 1pc tube cutter; 1pc flaring tool
- Carton size for the tube bender: 7.6 x 6.5 x 28 cm
- Red portable case size: 27 x 22 x 6.5 cm
- Total delivery size: 30 x 28 x 8.5 cm
-
- Flat Reamer #1: 15mm x 19mm - for universal injectors / applications
- Flat Reamer #2: 17mm x 17mm - for Delphi / Bosch injectors (BMW / PSA / Renault / Ford)
- Flat Reamer #3:17mm x 19mm - for Bosch injectors (Mercedes-Benz CDI)
- Angled Reamer #1:17mm x 17mm - for Mercedes Benz CDI
- Angled Reamer #2:17mm x 21mm - for Fiat / Iveco
-
- Suitable for installation/removal of ignition coils on VAG vehicles
- Long shafts with T-style handle ensure added stability and better control
- For use on Volkswagen and Audi vehicles fitted with direct ignition engines:
- ICR-01 VW Polo, Golf 1.4,1.6. Caddy 1.4, Bora 1.4,1.6. VW Beetle 1.4 petrol engines since 2003, Lupo 4 cylinder. Direct injection engine since 1999, Passat, Touran 1.6
- ICR-02 VW Golf, Bora, Passat, Sharan, Touareg 6 cylinder 2003. Transporter T5 6 cylinder injection engines since 2004
- ICR-03 VW direct injection engines Golf 2.0 since 2004, Touran since 2004, Passat since 2006
- ICR-04 VW 8 and 12 cylinder engines
- Audi A3 2.0 since 2004
- Audi A6 3.2 since 2005
- Delivery includes:
- 1 x puller as OEM T40039
- 1 x puller as OEM T10094 A
- 1 x puller as OEM T10166
- 1 x puller as OEM T10095 A
- 1 x blow molded case