- Can remove wheel hubs, half shafts, brake drums, drive shafts directly in the car
- Heavy duty set for the removal of stubborn four and five stud hubs and brake drums on cars and light commercial vehicles
- Suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, FIAT, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche…etc
- A mechanical spindle can press out drive shaft
- Spindle pressure: Maximum 12 t
- With the 4,3kg slide hammer
- Highest quality design for long life in industrial use
- Specification of 30 pcs:
- 4 x screw L15.4cm -2 circle
- 4 x screw L15.4cm -4 circle
- 4 x screw L16.8cm -2 circle
- 4 x screw L16.8cm -4 circle
- 4 x screw L16.8cm -4circle
- 4 x nuts Φ2.8cm
- 1 x lever for pneumatic wrench L25.8cm
- 1 x lever for slide hammer L57.3cm
- 1 x top block of lever for slide hammer
- 1 x hammer
- 1 x bearing-8 holes
- 1 x connecting block
- Supplied in a blow molded case
- Highest quality design for long life in industrial use
-
-
- Maximum load: 1050 kg
- 3 Pairs of jaws including:
- 2x Jaws 65mm - 125mm (Application areas: 80mm - 115mm)
- 2x Jaws 88mm - 160mm (Application areas: 110mm - 150mm)
- 2x Jaws 125mm - 215mm (Application areas: 140mm - 195mm)
- Applicable to BMW, Toyota, Ford, Opel, VW, Audi, Saab,Nissan, Honda, Subaru, Volvo, Mitsubishi, etc.
- Spindle: M 15 x 300 mm
- Material: Carbon steel
-
- Flaring tool kit set material: Steel
- Tube bender material: Cast aluminium
- For pipe flaring and can be used to make single or double flares on copper/brass/aluminium pipes, etc.
- 1 red Tube bender for 1/4", 5/16", 3/8" O.D. tubing
- 1 flaring tool kit set: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"; includes 7pcs double flaring adapters; 1pc tube cutter; 1pc flaring tool
- Carton size for the tube bender: 7.6 x 6.5 x 28 cm
- Red portable case size: 27 x 22 x 6.5 cm
- Total delivery size: 30 x 28 x 8.5 cm
-
- Suitable for:
- Petrol engines:1,0- 1,1 - 1.4 - 1,6 - 1,8 - 1.9 – 2,0 liters;1,6 - 1,8 -2.0 - 2,2 - 16V
- Citroen models: AX - ZX - XM - Visa -Xsara - Xantia - Dispatch–Synergie / Evasion - Berlingo - Jumpy - C15 - Relay /Jumper - C5 (2000-2002) - C9
- Peugeot models: 106-205 - 206 - 306-307- 309-405 - 406-407 - 605-806 - 807 - Expert - Partner - Boxer (1986) - 406Coupe - 607
- Diesel engines:1,4to 1,5 – 1,7 – 1,8 to 1,9 – 2,1 - 2,5 D / TD / TDI 1,4 – 1,6 – 2,0 2,2 HDI
- Citroen Models: AX - ZX - XM - Visa - Xsara - Xantia -Dispatch - Synergy / Evasiol - Berlingo - Jumpy - C2 - C3 - relay / jumper
- Peugeot models: 106-205 - 206 - 305-307 - 309-405 -406-406 Coupe - 605-607 - 806 - Express - Expert - Partner - Boxer (1996)
-
- Shaft length: 91.4 cm
- Thrust: 55 lbs (24.9 kg)
- Steer 360° rotatable: Yes
- Number of forward speeds: 5
- Number of reverse speeds: 3
- Max. Power: 672 W
- Salt water resistant: Yes
- Battery indicators: Yes
- Connection: 12 Volt
- Incl. battery cable: Yes
- Screw depth adjustable: Yes
- Length of steering handle adjustable: Yes
- Battery: not included
- Propeller: 3-leaf
- We recommend a 12V/80A (gel or car battery) suitable for 3-4 hours of sailing.
-
- Shaft length: 76 cm
- Thrust: 36 lbs (16.3 kg)
- Steer 360° rotatable: Yes
- Number of forward speeds: 5
- Number of reverse speeds: 3
- Max. Power: 336 W
- Salt water resistant: Yes
- Battery indicators: Yes
- Connection: 12 Volt
- Incl. battery cable: Yes
- Screw depth adjustable: Yes
- Length of steering handle adjustable: Yes
- Battery: not included
- Propeller: 2-leaf
- We recommend a 12V/80A (gel or car battery) suitable for 3-4 hours of sailing.
-
- Shaft length: 101.6 cm
- Thrust: 86 lbs (39 kg)
- Steer 360° rotatable: Yes
- Number of speeds forward: 5
- Number of speeds reverse: 3
- Max. Power: 1152 W
- Salt water resistant: Yes
- Battery indicators: Yes
- Connection: 24 Volt
- Incl. battery cable: Yes
- Screw depth adjustable: Yes
- Length steer adjustable: Yes
- Battery: not included
- Propeller: 3-leaf
- We recommend 2 x 12V/80A (gel or car battery) suitable for 3-4 hours of sailing.
-
- Dent repair set includes:
- 1 x Slide hammer puller
- 1 x Mini lifter
- 1 x Glue gun 40 W
- 32 x Glue tab (red + blue + yellow)
- 6 x Glue stick (yellow-1.1 x 20 cm)
- 2 x Knockdown tools (white)
- 1 x Glue removal bottle (white plastic bottle-60 ml)
- 1 x Tap down set with 8 different tips
- 1 x Tap down hammer
- 1 x Hammer (25 mm)
- 1 x Plastic scrapper
- 1 x Pulling bridge
- 1 x Mini T-bar
- 1 x Line board (yellow + black)
- 1 x Pump wedge (black)
- 1 x Carrying bag (red + black)
-
- Kit size: 45 x 30 x 9.5 cm (L x W x H)
- Supplied in a blow molded case for easy storage
- Long lasting and durable construction for a long service life
- Kit includes:
- 4 synchronizer gauges with fixed plate (vacuum)
- 4 rubber pipes 8 x 750 mm
- 4 extension tubes 3.9 x 52 mm and 4 tubes 3.9 x 122 mm
- 8 tubes with conical connector 8 x 40 mm
- 4 tubes 10 x 53 mm (M6 x 0.75)
- 4 tubes 10 x 60 mm (M6 x 1.0)
-
- Colour: Silver, red, yellow
- Material: Carbon steel
- Diameter: 3,5 mm
- Chain width: 9 mm
- Model: KN90
- Easy to install
- Tested on Ö-norm V5117
- Delivery contains:
- 2 x Chain
- 4 x Chainlink
- 1 x Nylon bag
- 2 x Disposable plastic glove
- Fits tyre size:
- 14'': 195R14, 205/70R14, 205/75R14, 215/65R14, 225/60R14
- 15'': 180/80R15, 180R15, 185/75R15, 185/80R15, 185R15, 195/70R15, 195/75R15, 205/65R15, 215/60R15, 225/55R15, 255/45R15
- 16''16,5'': 175/75R16, 175/80R16, 195/65R16, 205/60R16, 215/55R16, 225/50R16
- 17''17,5'': 205/55R17, 215/50R17, 225/45R17, 235/40R17
- 18'': 215/40R18, 215/45R18, 225/40R18
- OTHERS: 210/65R365, 220/55R390, 225/55R390
-
- Colour: Grey, silver and green
- Material: Chrome-vanadium steel
- Tool case dimensions: 46 x 36,5 x 15 cm (W x D x H)
- 133-piece tool set in robust aluminium case:
- 1 x Water pump pliers 250 mm
- 1 x Combination pliers 180 mm
- 1 x Side cutter 160 mm
- 1 x 18 mm utility knife
- 10 x Break off blades (in case)
- 1 x 5 m tape measure (19 mm wide)
- 1 x Bench hammer 300 g
- 2 x Ratchet 3/8" with adaptor
- 9 x Socket 3/8" (10-11-12-13-14-15-16-17-18 mm)
- 8 x Socket 1/4" (4-4,5-5-5,5-6-7-8-9 mm)
- 1 x Adaptor for socket (10 x 6,3 mm)
- 1 x Bit adaptor (6,3 x 6,3 mm)
- 1 x Spark plug socket wrench (10 x 21 mm)
- 1 x Extension (10 x 75 mm)
- 1 x Extension (10 x 150 mm)
- 6 x Workshop screwdriver PH1 x 80, PH2 x 100 mm, slotted 3,0x75, 4,0x100, 6,5x125, 8,0x150 mm
- 2 x Precision screwdriver slotted 2,5 x 50 mm, PH00 x 50 mm
- 1 x Voltage tester
- 7 x Hacksaw with 6 spare blades
- 60 x Quick-change bit holder with 60 bits
- 1 x 1/4" screwdriver handle
- 8 x Combination wrench (6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22)
- 8 x Angled hex key (1,5-2,0-2,5-3,0-4,0-5,0-5,5-6,0)
-
- Car tool: Braking tools
- Material: Carbon steel
- Case size: 38,5 x 30 x 8 cm (L x W x H)
- Total weight: 4,7 kg
- For quick and efficient brake servicing
- Delivery includes:
- 26 x adaptor
- 2 x magnetic handed spindle (left and right)
- 2 x hex key (6 mm and 7 mm)
- 2 x pin punched (3 mm and 5 mm)
- 4 x reaction plate
- 3 x brake bushing
- 1 x CV joint grease
- Suitable for almost all types of cars
-
- Specifications:
- Overall size: 83 x 84 x 25 cm (L x W x H)
- Motor: 12 V / 350 W
- Speed: 6 - 7 m / min
- Gear ratio: 326:1
- Maximum vehicle load: 2270 kg
- Maximum jockey wheel Load: 272 kg
- Suitable for use on inclines of maximum 5 degrees
- Recommended power: DC 12 V, 24 Ah lead-acid battery or jump start (battery not included)
- Features:
- Easy to operate
- Solid non-slip rubber wheel
- Power mover with clamp
- Automatic brake function
- Forward and reverse function
- Ideal for trailers, boats, caravans, campers
- Delivery includes:
- 1 x Jockey wheel mover
- 1 x Power cord
- 1 x Mounting bracket
- 1 x Accessories set
- Please note: battery is not included in delivery
-
- Flat Reamer #1: 15mm x 19mm - for universal injectors / applications
- Flat Reamer #2: 17mm x 17mm - for Delphi / Bosch injectors (BMW / PSA / Renault / Ford)
- Flat Reamer #3:17mm x 19mm - for Bosch injectors (Mercedes-Benz CDI)
- Angled Reamer #1:17mm x 17mm - for Mercedes Benz CDI
- Angled Reamer #2:17mm x 21mm - for Fiat / Iveco