Free Delivery on all Orders     |     061970100     |     info@homeandgarden.ie
    • Material: Aluminium and plastic
    • Case size: 41 x 28 cm (W x D)
    • Delivery includes:
    • Air tools:
    • 1 x 1/2" air impact wrench
    • 1 x 1/4" air die grinder
    • 1 x 3/8" air ratchet wrench
    • 1 x Air hammer (150 mm)
    • 1 x Blow gun
    • Accessories:
    • 8 x Socket (11 mm, 12 mm, 13 mm, 17 mm, 1/2", 3/4", 5/8" and 9/16")
    • 1 x Adapter (3/8"-1/2")
    • 1 x Oil container
    • 1 x Teflon tape
    • 1 x 120 mm chisel (pointed)
    • 1 x 120 mm chisel (flat)
    • 1 x 120 mm chisel (edging chisel)
    • 1 x Air coupler
    • 1 x Bit holder
    • 1 x 1/8" collet
    • 1 x 5/32" hex key
    • 1 x Tyre chuck
    • 1 x Blow gun adapter
    • 5 x 1/4" mounted grinding stone
    • 5 x 1/8" mounted grinding stone
    • 1 x Grinding wheel
    • 10 x Grinding wheel paper
    • 1 x Rubber nozzle
    • 1 x Tapered nozzle
    • 2 x Spanner
    • 1 x Spring retainer
    • 2 x Inflating needle
    • 1 x High-pressure nozzle
    • 1 x Safety nozzle
    • 1 x Female nipple
    • 5 x Male nipple
    • 9 x Screwdriver bit
    • All tools and accessories are stored in a handy blow-moulded case
    • Paintless Dent Removal set includes:
    • 10 x Repair rod (B-8, B-9, B-10, B-11, C-1, C-2, C-3, C-4, C-5, C-6)
    • 1 x Dent lifter (red)
    • 1 x Big T-bar slide hammer
    • 1 x Glue gun (40 W)
    • 1 x Line board with flexible holder (yellow and black)
    • 10 x Glue stick (black, 11 x 200 mm)
    • 1 x Mini T-bar handle (red and black)
    • 1 x Crossbar puller with 7 different tabs
    • 1 x Rubber repair hammer
    • 1 x Tap down hammer
    • 1 x Tap down tool with 8 different tips
    • 10 x Glue tab (red)
    • 10 x Glue tab (blue)
    • 4 x Glue tab (yellow)
    • 4 x Glue tab (aluminium)
    • 1 x Plastic chisel (red)
    • 1 x Plastic scraper (orange)
    • 5 x Tap down pen
    • 1 x Mini suction cup
    • 1 x Carrying bag (red and black)
    • Material: Carbon steel
    • Case dimensions: 46 x 36.5 x 9.5 cm (L x W x H)
    • Suitable for BMW M52 M54 M60 M62 E46
    • Delivered in a durable storage case
    • Suitable for BMW following models:
    • - 320 E46 - 323 E46 - 325 E46
    • - 328 E46 - 330 E46 - 520 E39
    • - 520 E60 - 520 E39 - 523 E39
    • - 525 E39 - 525 E60 - 528 E39
    • - 530 E34 - 540 E34 - 535 E39
    • - 530 E39 - 530 E60 - 728 E38
    • - 730 E65 - 730 E35 - 730 E32
    • - 735 E38 - 740 E32 - 740 E38
    • - X3 E83 - X5 E53 - Z3 - Z4 E85
    • Includes following tools:
    • 1 x Camshaft adjusting tool (M52, M54)
    • 1 x Vanos test gauge (M52, M54)
    • 1 x Locking block cylinder 1-4 (M60, M62)
    • 1 x Locking block cylinder 5-8 (M60, M62)
    • 1 x Chain tensioner (M52, M54)
    • 1 x Chain tensioner (M60, M62)
    • 1 x Crankshaft lock
    • 1 x Test adapter (M52, M54)
    • 1 x Chain tensioner pin (M60, M62)
    • Material: Steel
    • Case dimensions: 38 x 10 x 6 cm (L x W x H)
    • Set includes:
    • 4 x Adaptor, 3.1 x 5 cm, 3.3 x 5 cm, 2.1 x 6.5 cm, 2.1 x 6.5 cm (Diam. x L)
    • 4 x Slide hammer, 7.5 x 16 cm, 6.5 x 45.5 cm, 8.5 x 59.5 cm, 10.5 x 43.5 cm (Diam. x L)
    • 3 x Nut (length: 3 cm, 3.5 cm, 4 cm)
    • 2 x Nut (diameter: 2.3 cm, 2.6 cm)
    • 2 x Jaw
    • 2 x Puller (length: 10.5 cm, 12.8 cm)
    • 1 x 9.5 mm spot weld cutter
    • 12 x Screw (length: 3.6 cm, 5 cm, 3 x 5.5 cm, 5 x 6 cm, 2 x 6.1 cm)
    • 1 x Extractor tool (length: 14 cm)
    • 4 x Snap ring
    • 1 x Shaft (length: 31.7 cm)
    • 5 x Socket (25 mm, 27 mm, 28 mm, 29 mm, 30 mm)
    • Material: Nylon
    • Fast oil filling without spilling
    • Designed for vehicles with internal baffles or shields
    • Delivered in a blow-moulded case for easy storage and transport
    • Delivery includes:
    • 1 x Funnel
    • 1 x Adaptor
    • 1 x Offset pipe
    • 12 x Threaded adaptors
    • Colour of Tabs: Blue
    • Material: Plastic
    • 6 sets (36 piece in total)
    • Material: Steel
    • Delivery includes:
    • 1 "C" Frame Press
    • 1 "C" Frame Screw
    • 3 Receiving Tubes Sizes:
    • (2-1/4'*2.723'I.D.*3'O.D.)
    • (1-3/4'*2-1/4'I.D.*2-1/2'O.D.)
    • (1-3/4'*2-1/4'I.D.*2-1/2'O.D.)
    • Installer and Remover Adapters For 1967 Thru Current (cars made from 1967 until now) 1/2 And 3/4 Ton 4WD Vehicles With DANA 44 Front Axle Found In FORD, GM, DODGE, IHC & JEEP vehicles
    • Suitable for installation/removal of ignition coils on VAG vehicles
    • Long shafts with T-style handle ensure added stability and better control
    • For use on Volkswagen and Audi vehicles fitted with direct ignition engines:
    • ICR-01 VW Polo, Golf 1.4,1.6. Caddy 1.4, Bora 1.4,1.6. VW Beetle 1.4 petrol engines since 2003, Lupo 4 cylinder. Direct injection engine since 1999, Passat, Touran 1.6
    • ICR-02 VW Golf, Bora, Passat, Sharan, Touareg 6 cylinder 2003. Transporter T5 6 cylinder injection engines since 2004
    • ICR-03 VW direct injection engines Golf 2.0 since 2004, Touran since 2004, Passat since 2006
    • ICR-04 VW 8 and 12 cylinder engines
    • Audi A3 2.0 since 2004
    • Audi A6 3.2 since 2005
    • Delivery includes:
    • 1 x puller as OEM T40039
    • 1 x puller as OEM T10094 A
    • 1 x puller as OEM T10166
    • 1 x puller as OEM T10095 A
    • 1 x blow molded case
    • Flat Reamer #1: 15mm x 19mm - for universal injectors / applications
    • Flat Reamer #2: 17mm x 17mm - for Delphi / Bosch injectors (BMW / PSA / Renault / Ford)
    • Flat Reamer #3:17mm x 19mm - for Bosch injectors (Mercedes-Benz CDI)
    • Angled Reamer #1:17mm x 17mm - for Mercedes Benz CDI
    • Angled Reamer #2:17mm x 21mm - for Fiat / Iveco
    • Hex bits (6 hex drive): 8 and 10 mm.
      Spline bits (6 hex drive) M8 + M 10.
      T-profile bits (6 hex-drive): T 40 and T 50
      2 stationary bits M 50 and M 10: with 33-tooth-captive use.
      Special insert for: Bosch and Renault alternators.
      Includes adapter for: VW, Audi, BMW, Mercedes and Ford.
    • Release Fork Opening: 28 mm, 23mm, and 17mm.
    • Rippled handle, length: 200mm; Diameter: 19 mm
    • 10 mm Air hammer handle, Length: 175 mm; Diameter: 12 mm
    • Car tool: Braking tools
    • Material: Carbon steel
    • Case size: 38,5 x 30 x 8 cm (L x W x H)
    • Total weight: 4,7 kg
    • For quick and efficient brake servicing
    • Delivery includes:
    • 26 x adaptor
    • 2 x magnetic handed spindle (left and right)
    • 2 x hex key (6 mm and 7 mm)
    • 2 x pin punched (3 mm and 5 mm)
    • 4 x reaction plate
    • 3 x brake bushing
    • 1 x CV joint grease
    • Suitable for almost all types of cars

Title

Go to Top